WORKBOX3D Buy the Kit
printed to order — ships in ~2–3 weeks. One-person shop. Orders are first come, first served. Some parts are typically in stock, so your kit may ship sooner. Queue updated November 2026.

Safety

The text below is the designer’s guidance, from the Important Note that ships with every WorkBox kit. It is reproduced — not rewritten — and attributed to Creative3DP, the designer.

PLEASE READ THIS BEFORE YOU USE THE WORKBOX.

The WorkBox is an enclosure with a duct port. It is not a sealed cabinet and it is not a filtration system. It contains dust, scraps and overspray, and it gives you a single place to extract from.

It does not clean the air for you. The fan, the ducting and where you vent to are your responsibility, and that matters most with solvent-based sprays and resin. Vent outdoors wherever you can, and follow the safety guidance for whatever material you are working with.

The designer’s warnings

  • Printed plastic is not fireproof. Keep heat sources and open flame away from the chamber.
  • PLA in particular softens with heat. If you work with anything hot, print in PETG.
  • Check that your light source runs cool. The recommended puck LED does.

What that means for your kit choice

We print your kit in the material you choose. The designer’s published guidance, from the Printing Guide:

MaterialDesigner’s guidance
PLAEasiest to print; fine for dry work — sanding, filing, assembly. Softens with heat; attacked by some solvents.
PETGRecommended by the designer for spray work — tougher, more resistant to solvents and heat.
ASAMost durable; heat and UV resistant.

Material choice is yours, made with the designer’s specifications in front of you. We print to the designer’s settings and do not alter the design.

Extraction is your call

The back panel has a duct port and a printed adapter. What you connect to it — hose, fan, where you vent — is your choice and your responsibility. Nothing is required to build or use the WorkBox.

Questions? support@workbox3d.com.